Svenska Dokumentmallar
3D-printed spare parts 2027 – CAD file, safety testing and product liability | Word/PDF/Excel
3D-printed spare parts 2027 – CAD file, safety testing and product liability | Word/PDF/Excel
- File format
- DOCX, PDF, XLSX
- Document language
- Five Swedish work templates one Swedish user guide and one English User Guide; the work templates are not translated into English
- Number of files
- 7
Digital download. No physical product is shipped.
Couldn't load pickup availability
About this template
3D-printed spare parts 2027 – CAD file, safety testing and product liability is a niche documentation package for companies that develop, sell or use digital manufacturing files and manufacture physical spare parts with 3D printers. It builds an unbroken chain of evidence: file version → material batch → print job → safety test → delivery → change or complaint.
The background is EU's new product liability directive (EU) 2024/2853. Articles 4.1–2 now expressly include digital manufacturing files containing the functional information needed for automated manufacturing, for example with a 3D printer. This is not the same as all image files, visualizations or ordinary drawings. A technically usable CAD file or print job may, however, need to be assessed as a product in itself or physical good in itself.
Important Swedish status on November 14, 2026: proposition 2026/27:12 on a new product liability act has been submitted to the Swedish Parliament but is still a bill. The government proposes an effective date of January 1, 2027. Article 2 of the EU directive refers to products placed on the market or put into service after December 9, 2026. The date and liability for an actual event must therefore be reviewed against the Swedish legislation decided at that time. The product is marketed as preparation and documentation support, not as a claim that the bill is already law.
01. Package contents
Five Swedish work templates, a Swedish user guide and an English User Guide, all in both editable Word (DOCX) and corresponding searchable, printable PDF. In addition, an Excel register with 11 tabs and 18 control metrics. Total 15 customer files – 7 DOCX + 7 PDF + 1 XLSX in a digital ZIP. The PDF versions lack interactive form fields.
02. What the files contain
Traceable registration of original file and checksum, copyright and manufacturer role, printer and slicer revision, material batch, intended physical function, risk analysis, actual safety test with original report, affected customer/delivery batch, version change and documented complaint. Excel shows missing evidence, failed tests, high consequences and open blocking cases, but never certifies a part, establishes no liability for damages or determines whether CE marking is required.
Files in the package
| Document | Practical function | Language | Format |
|---|---|---|---|
| 01. CAD file, product classification and liability | File type, physical spare part, revision, publisher and actor role. Distinguishes functional manufacturing file from ordinary drawing. | SV | DOCX + searchable PDF |
| 02. Print order, material and process | Printer, material batch, slicer, print setting, post-processing and actual process evidence. | SV | DOCX + searchable PDF |
| 03. Safety risk and testing | Intended use, malfunctions, test plan, actual original report and manual decision. | SV | DOCX + searchable PDF |
| 04. CAD revision and change control | File hash before/after change, affected batches, new test requirement and liability for substantial change. | SV | DOCX + searchable PDF |
| 05. Complaint, damage and batch block | Neutral damage case, original evidence, possible product block, verified correction and customer communication. | SV | DOCX + searchable PDF |
| 06. Swedish user guide | Seven work steps, legal sources, dating and instructions for Excel. | SV | DOCX + searchable PDF |
| 07. English User Guide | English user instructions for the Swedish templates; not a complete English template set. | EN | DOCX + searchable PDF |
| 08. Excel – CAD, print and control register | 11 tabs with linkable file/batch basis, test, delivery, actor and action. | SV | XLSX |
Why a 3D-printed spare part needs its own chain of evidence
A physical spare part can look the same in two prints but have different properties depending on material batch, layer orientation, slicer settings, printer and post-processing. Therefore, a file name or sales order is rarely enough to recreate the circumstances that applied to the delivered part. The package therefore requires separate and actual references to the original file, actual production batch and actual test report. It performs no technical simulations or strength calculations.
EU 2024/2853: Product liability is not the same as product safety
The directive provides rules for compensation when a product has a safety deficiency that causes compensable damage. Liability can apply to different economic operators depending on what they developed, manufactured, imported or substantially changed. A user who logs a fault has not thereby proven legal liability. Therefore, the template distinguishes between reported deviation, technical investigation, causal link, competent legal assessment and verified action.
Separately, EU's general product safety regulation 2023/988 (GPSR) applies to consumer products covered by it. Article 9 deals with the manufacturer's obligations and article 13 when another actor can be considered the manufacturer after a substantial change. Special rules may apply to, for example, electrical products, machinery or medical devices. There is no general CE requirement for every 3D-printed spare part; the correct product category and applicable rules must be tested.
Version control: CAD, STL, STEP, G-code and print batch
The templates distinguish between original design, interchangeable geometry, slicer/machine program and physical product. The Excel tab CAD files has fields for actual file type, revision, SHA/checksum and product ID. Prints link an actual machine, a print job and material batch to exactly the revision that was used. A new file version must not automatically inherit earlier test evidence if safety is affected.
Risk assessment and testing
Identify intended function, conceivable failure, burn and heat risk, sharp parts, electrical fault, chemical contact or foreseeable incorrect assembly. Safety-critical applications – for example load-bearing, pressurized or medical components – may require special expertise and product regulations. Document 03 provides fields for actual test method, test batch, original report, outcome, reviewer and decision. A failed test is flagged internally as FAILED – BLOCK; no formula can make a technically failed test pass.
Excel register with eleven tabs
Overview, CAD files, Prints, Material, Risks, Testing, Deliveries, Actors, Deviations, Actions and Read me. The overview counts 18 control metrics, for example number of registered files, missing file basis, unclear actors, print jobs without process evidence, failed tests, delivery blocks and incompletely verified actions.
Controls show, among others, FILE BASIS MISSING, MANUFACTURING EVIDENCE MISSING, MATERIAL EVIDENCE MISSING, HIGH CONSEQUENCE – TEST, TEST EVIDENCE MISSING, FAILED – BLOCK, BLOCKED, EVIDENCE MISSING and EXPIRED. Zero in the overview means no registered entries, never that an item has been approved. Under Actions!M2, a manual reference date is set as YYYYMMDD for expired actions.
How you work with the package
- Register the digital file's actual nature, version, source and intended physical spare part.
- Assess which economic operators create, change, import and deliver the file or part.
- Block and archive the actual original, revision and checksum before change.
- Link each print batch to actual printer, slicer, material batch and work order.
- Perform an individual risk assessment and save results from actual tests.
- Deliver only after a competent decision with applicable product regulations and documented basis.
- In case of error: document neutrally, secure original evidence, assess risk, block affected batches if necessary and verify correction.
Frequently asked questions
Is a CAD or STL file always a product according to the new directive?
No. It is required that it is actually a digital manufacturing file with the functional information that makes automated manufacturing possible according to article 4.2. An ordinary image or visualization is not automatically such a file.
Does the new Swedish product liability act already apply in November 2026?
No. Prop. 2026/27:12 is still a parliamentary matter. The government proposes an effective date of January 1, 2027. Check the Swedish Parliament's actual decision and transitional provisions before applying new law.
Is it December 9, 2026 or January 1, 2027 that applies?
Article 2 of the EU directive applies to products that have been placed on the market or put into service after December 9, 2026. The government's Swedish bill proposes a national legal effective date of January 1, 2027. These are different legal dates that must be kept separate.
Must every 3D-printed spare part be CE marked?
No. CE requirements are determined by which EU product regulations apply to exactly the finished product. An internal risk journal never replaces a necessary assessment against such regulations.
Is a slicer profile sufficient evidence that a spare part holds?
No. Actual print process, material properties and relevant test method must be proven. A file version or setting image is not a strength report.
Does a customer complaint mean that the seller is liable for damages?
Not automatically. The product's possible safety deficiency, compensable damage, causal link and liable actor need to be assessed according to applicable law.
What languages and formats are included?
Five Swedish editable work templates and a Swedish user guide, plus English User Guide, in both DOCX and searchable PDF. The Excel register is Swedish. PDF is printable but not an interactive form.
Are CAD models, test certificates or legal opinion included?
No. No design files, actual test protocols, CE markings, authority decisions or lawyer certifications are included. The documents are work templates.
Legal sources and delivery terms
EU 2024/2853 – product liability directive · Prop. 2026/27:12 – new Swedish product liability act (proposal) · EU 2023/988 – general product safety.
Version 1.0 · AI-assisted legal source control November 14, 2026 · Jurisdiction Sweden/EU · Delivery ZIP. The end customer can receive digital download only when the store owner at a later stage publishes the product draft and links the correct ZIP file in Digital Products. The material is not independently lawyer-reviewed, laboratory-tested or authority-certified.
