Repair clause 2026 – which spare parts qualify under EU design Article 22?
The EU repair clause for spare parts is limited, not a general right to copy parts. Article 22 of Regulation (EU) 2026/715 concerns a component part of a complex product whose design is dependent on that product's appearance, used solely to repair the complex product and restore its original appearance. To rely on this exception, manufacturers or sellers must duly inform consumers of the spare part's commercial origin and the identity of its manufacturer.
A third-party part used to restore a damaged car to its original appearance may qualify if each condition is fulfilled. A styling kit that changes the car's appearance does not automatically qualify. This exception concerns EU design protection and does not independently remove trade mark, patent, copyright or product safety duties.
What changed on 1 July 2026?
Regulation 2026/715 took effect on 1 July 2026. It codifies and repeals the former Regulation 6/2002. The former Article 20a corresponds to the present Article 22, as the official correlation table in Annex III confirms. Use the present article number in new documents. The EUIPO reported that the modernised EU design system became fully applicable on that date.
Which spare parts can qualify?
Check that the item is a component part of a complex product, that its appearance is dependent on the appearance of the complex product, and that it is intended exclusively for repair restoring the original appearance. Merely stating ‘fits model X’ or ‘aftermarket part’ does not settle the legal test.
| Control question | Evidence | Potential issue |
|---|---|---|
| Complex product and specific part | SKU, model, position and images of the assembly | A freestanding accessory may not be a covered component |
| Dependence on original appearance | Compare original part, replacement appearance and intended repair | Styling and alteration may exceed the repair exception |
| Repair-only purpose | Product instructions, supplier terms, marketing and actual intended use | Advertising customisation as repair is risky |
| Origin and manufacturer | Real manufacturer name, marketed brand and supporting supplier records | Missing information can prevent reliance on Article 22(1) |
Article 22(2): tell consumers who actually made the part
Under Article 22(2), the manufacturer or seller who relies on the repair clause must duly inform consumers, by a clear and visible indication on the product or in another appropriate form, of its commercial origin and the manufacturer's identity, so they can distinguish competing repair products. Recital 29 explains that the product, or if not feasible its packaging or accompanying document, should identify at least the marketed trade mark and manufacturer name. For online sales, including these verified facts in the product card is prudent, but Article 22 does not prescribe one mandatory web-page layout. Assess online safety and consumer rules separately.
Example of an accurate product card
Replacement part for repair of [identified complex product and model], intended to restore original appearance. Part manufacturer: [verified legal name]. Marketed brand/commercial origin: [verified brand]. Not manufactured by [original maker] [only if truthful and necessary]. Replace all placeholders before publishing; never invent identity or imply OEM origin.
Must a supplier guarantee the end user's conduct?
Article 22(3) says the maker or seller need not guarantee that end users ultimately use the part solely for qualifying repair. Nevertheless, recital 30 explains reasonable diligence, for example contractual means, towards downstream actors who might intend other use. Keep a documented check of marketing and distribution without claiming a duty to monitor every consumer's actual repair.
EU design and national design law have different dates
| Legal regime | Main rule | Position in November 2026 |
|---|---|---|
| EU Regulation 2026/715 Article 22 | EU design repair exemption and origin duty | Directly applicable from 1 July 2026 |
| Directive 2024/2823 Article 19 | National registered design harmonisation | National transposition deadline 9 December 2027 |
| Directive 2024/2823 Article 19(4) | Conditional transition for earlier national design filings | For eligible rights applied for before 8 December 2024, protection may continue until 9 December 2032, subject to the directive's national-law condition |
| Directive 2024/1799 | Consumer right-to-repair duties | Separate legal framework, not the same exception |
Five practical steps before selling
- Record SKU, finished assembly, original design, supplier and actual spare-part manufacturer.
- Test the Article 22(1) conditions: dependent part, complex product and exclusively restoring original appearance.
- Verify true manufacturer identity and marketed trade mark, and prepare clear consumer information under Article 22(2).
- Check marketing and downstream contractual arrangements for incompatible styling use; do not promise to guarantee final consumer conduct.
- Pause unsupported use of the exception; assess relevant trade marks, patents, safety rules and national rights separately.
Three contrasting examples
Collision repair: A matching body panel replaces a damaged original panel. Article 22 may apply if all conditions and origin information requirements are fulfilled; it is not automatic approval.
Styling conversion: A new front creates a visibly modified appearance. This is not necessarily restoration of the original product and needs separate rights review.
Unidentified manufacturer: A generic SKU and “fits X” do not supply the true manufacturer and commercial-origin information needed for a seller seeking the exemption.
Frequently asked questions
Can every aftermarket car part be copied freely in 2026?
No. The narrow design exception has conditions, and other rights and safety laws remain relevant.
Must the part be labelled an original part?
No. Give truthful, clear commercial-origin and maker information; avoid misleading OEM claims.
Does Article 22 require a fixed online product-card format?
No. It requires clear visible information on the part or another appropriate form. An accurate web product card is a practical measure, not a prescribed page template.
Does the EU rule already override all national registered designs?
No. EU design rights and national registered designs have distinct rules, transposition dates and conditional transition provisions.
Must sellers guarantee how every customer uses the part?
No. Article 22(3) excludes that guarantee, without eliminating reasonable supply-chain diligence.
Official legal sources
- EU Regulation 2026/715, Articles 22, 163–164, recitals 29–30, Annex III
- EU Directive 2024/2823, Articles 19 and 36
- EUIPO – application from 1 July 2026
- EU Directive 2024/1799 – separate right-to-repair framework
Editorial source check: 13 November 2026. General information under Swedish/EU law, not individual legal or product safety clearance. Review actual design rights, manufacturer evidence, trade marks and technical compliance before market release.
Related document package
For editable documentation on this subject, see the matching Word, PDF and Excel package. Check the product description for the exact contents. It may currently be presented in Swedish.
