PCB in Swedish renovations – sampling, 50/500 ppm, three-week notice and waste records
Buildings constructed or renovated in Sweden in 1956–1973 may have old joint sealants or anti-slip floor compounds containing PCBs. Before disturbing such materials, identify the original components and collect testing evidence. Owners need to distinguish an inventory, the duty to remove certain compounds, advance municipal notification, safe working methods and hazardous-waste reporting. This guide provides a documentation process, not instructions for do-it-yourself remediation.
Buildings constructed or renovated in Sweden in 1956–1973 may have old joint sealants or anti-slip floor compounds containing PCBs. Before disturbing such materials, identify the original components and collect testing evidence. Owners need to distinguish an inventory, the duty to remove certain compounds, advance municipal notification, safe working methods and hazardous-waste reporting. This guide provides a documentation process, not instructions for do-it-yourself remediation.
When must owners investigate PCB?
Section 16 of Sweden's PCB Ordinance (2007:19) calls for the owner to examine joint and anti-slip flooring compounds where they may have been used during construction or renovation in 1956–1973. The year alone does not prove contamination. Collect old municipal records, renovation dates and laboratory reports; use competent professionals to identify and sample locations. Insulated glass units and certain electrical equipment can also contain PCBs, but they do not automatically follow the identical joint-compound rules. Section 19 has a narrow small-house exception based on both ownership and Swedish property-tax classification.
Interpreting 50 and 500 ppm: decision table
| Evidence | What to assess |
|---|---|
| Below 50 ppm | Outside the particular section 17/17a brackets; other hazardous substances may still require the waste to be treated as hazardous. |
| 50–500 ppm (0.0050–0.0500 weight %) | Section 17a requires removal no later than renovation, conversion or demolition. Assess notice under section 18. |
| Above 500 ppm (over 0.0500 weight %) | The main deadlines in section 17 mostly expired in 2014/2016. Specific exceptions and exemptions may matter; do not automatically defer until a future renovation. |
| No reliable test | Do not plan grinding or demolition of suspect material without an adequate expert assessment and laboratory test. |
| Qualifying one- or two-dwelling small house | Sections 16–18 do not apply only where the house is owned by an individual or estate and has the specified small-house tax classification. Environmental and waste duties remain. |
Three-week notification is not automatic permission
Under section 18, an owner must notify the supervisory authority at least three weeks before undertaking work governed by sections 17, 17a or 17b. Provide the building, locations, laboratory concentrations, areas, proposed removal and containment method, schedule, contractor and waste arrangements. The municipal environmental department is normally the authority. Submitting the notification does not automatically grant permission to start or overrule protective requirements. Preserve confirmation, dates, case number and official responses. An exemption under section 17b must be decided individually.
Seven steps for owners and project managers
- Identify the owner, construction and renovation years, and exact applicability of the section 19 exception.
- Collect earlier surveys, municipal records, plans, test reports and remediation documentation.
- Mark suspect sealants and floor compounds with unique sampling IDs and commission competent laboratory testing.
- Review material type and concentration; keep removal obligations, hazardous-waste classification and occupational risks separate.
- Where relevant, submit a complete notification at least three weeks before work and address authority requirements.
- Use competent contractors with appropriate containment, dust prevention and protection of adjacent materials and soil.
- Retain completion records, follow-up results, waste codes and weights, transport records, receiver evidence and electronic reporting data.
Three examples: facade, flooring and private house
1965 facade joint: 120 ppm
Falls in the 50–500 ppm bracket. During a facade renovation, assess removal under 17a and a section 18 notice; a laboratory result alone is not an authority decision.
1972 anti-slip floor: 950 ppm
Above 500 ppm. Historic deadlines may have passed. Check exceptional circumstances and formal decisions rather than assuming a later demolition is sufficient.
Privately owned detached home
If all section 19 conditions are met, sections 16–18 do not apply. PCBs still require responsible waste handling.
Hazardous-waste receipts and reporting are different
A professional undertaking that generates, transports, collects or treats hazardous waste has its own duties under Chapter 6 of Sweden's Waste Ordinance (2020:614). Information must normally reach the Swedish waste register electronically within two working days of when the record was due. The producer, transporter and receiving facility may each have separate reporting obligations. Classify waste properly before choosing a six-digit code, check carrier and recipient authorisations, and retain receipts. Neither a disposal receipt nor a private spreadsheet substitutes for statutory reporting. Keep PCB-bearing materials separate and prevent dispersal.
PCB in concrete, ground and new sealants
PCB can migrate from old joint compound into nearby concrete, construction material and ground. Fresh sealant can become contaminated again. A specialist should determine additional testing and follow-up needs. Do not grind, cut or burn suspect PCB material yourself.
Four common questions
Must all 1956–1973 buildings be remediated?
No. The actual material, test and applicable provisions decide. Age prompts investigation; it does not prove PCBs.
Are 50 ppm and 500 ppm the same threshold?
No. The 50–500 ppm band is in section 17a; above 500 ppm follows section 17 and different timing rules.
Does a privately owned small house need a three-week notice?
Not under section 18 if every condition of the section 19 exception applies. Other environmental and waste rules remain.
Is the waste facility's receipt enough?
Not always. Business actors may have independent records, transport documents and waste-register reporting duties.
Official Swedish legal sources
- Riksdagen – Förordning (2007:19) om PCB §§16–19, 21, 23
- Naturvårdsverket – avlägsna PCB-haltiga fog- och golvmassor
- Naturvårdsverket – materialinventering inför rivning
- Naturvårdsverket – farligt avfall och Avfallsregistret
- Naturvårdsverket – förorenad mark vid PCB-fogar
Related construction guide
Mallbutiken's separate guide on construction self-inspection and PBL control plans explains project documentation other than PCB notifications. Related construction guide
Editorial review of Swedish legislation and official guidance dated 19 November 2026. No independent legal or environmental expert certification or delivery verification of the associated product is claimed.
Explore the topic
Business guides – contracts, HR, AI & complianceSelf-inspection in construction 2026 – the difference between self-inspection and inspection plans according to the Planning and Building Act (PBL)
Guide to self-inspection in construction: control points, evidence, non-conformities, and the important difference between the contractor's self-in...
