6:6a request or safety representative stop? Rules, differences and checklist
Guidance for safety representatives and employers · Swedish occupational health and safety law · Factual information checked 24 October 2026
A 6:6a request is a safety representative's demand that the employer investigate or remedy workplace deficiencies. A safety representative stop under Chapter 6, Section 7 is something else: a decision to halt certain work when conditions exist that may include an immediate and serious danger to life or health. Both rules are in the Work Environment Act, but they have different purposes, thresholds, and procedures.
6:6a request and safety representative stop – comparison
| Question | Chapter 6, Section 6a | Chapter 6, Section 7 |
|---|---|---|
| Main purpose | Request measures or an investigation of the work environment. | Halt certain work when the conditions in the Act are met. |
| When? | When the safety representative assesses that workplace measures are needed. | Among other things when work involves immediate and serious danger and immediate remedy cannot be achieved. |
| First step | Submit a concrete request to the employer. | Contact the employer about the acute danger and announce the stop. |
| Employer's role | Confirm receipt of the request; provide a response without delay and manage the risks. | Take a position on the stop, remove the danger, or contact the Swedish Work Environment Authority in case of disagreement. |
| Authority review | The safety representative may request a review by the Swedish Work Environment Authority if the requirements are not addressed within a reasonable time. | The Swedish Work Environment Authority will take a position on the continued stop if the parties do not resolve the issue. |
The stop provision also covers special situations, including certain solo work and work in violation of current prohibitions issued by authorities. This guide provides the main features, not a complete assessment of all exceptions. Read the Swedish Work Environment Authority's full guidance on safety representative stops.
What is a 6:6a request and who may make one?
A safety representative who assesses that the employer needs to take measures for a satisfactory work environment should primarily turn to the employer. The representative may also request a special investigation within the scope of their area. A local safety representative must stay within their area. Student safety representatives are also covered by the provision under the Act, but their powers differ in other respects.
The purpose is to identify an actual risk, clarify what result is needed, and enable measures through cooperation. A written request simplifies follow-up and evidence, but the important thing is that it reaches the right recipient and is understandable.
What should a written 6:6a request contain?
- Sender and workplace: safety representative, area of responsibility, employer, and contact details.
- Workplace deficiency: concrete description of the risk, location, time, and affected work steps.
- Basis: factually relevant observations, documentation, or previous risk assessments.
- Requested measure or investigation: what the employer is actually asked to do, preferably broken down into separate requirements.
- Justification: why the measures are needed from a workplace safety perspective.
- Reasonable response time: an express request for a response with a date adapted to the risk and complexity of the situation.
- Confirmation of receipt: request written confirmation that the employer has received the submission.
There is no general statutory fixed response time in days for all 6:6a requests. The employer shall provide a response without delay; a response time specified by the safety representative should be reasonable in the individual case. The Swedish Work Environment Authority's guidance for employers describes the steps.
What does the employer need to do when the request arrives?
Receive the request and confirm receipt in writing when requested by the safety representative. Clarify if anything is unclear. Investigate the presented risks, involve the safety representative, and provide a response without delay about what is planned or has been implemented. Document who is responsible for each measure, the schedule, and how the effect will be followed up.
If the employer does not provide a response or does not consider the request within a reasonable time, the safety representative may turn to the Swedish Work Environment Authority for a review of an order or prohibition. The authority reviews the measures or investigations that have been requested; the safety representative may not sharpen or replace the requirements afterwards when the matter is submitted to them. It is therefore particularly important to formulate the original request clearly.
What questions are not suitable for a 6:6a review?
This path is not a general dispute resolution for everything that happens at a workplace. The Swedish Work Environment Authority states that the authority, within the framework of a 6:6a review, does not decide, for example, disputes about the Co-Determination Act, the Employment Protection Act, interpretation of collective agreements, business strategies, or the employer's general personnel policy. Cooperation issues under Chapter 6 of the Work Environment Act are also not reviewed in this way.
If the question instead concerns certain working time conditions, for example extra overtime or extra overtime pay, Section 19a of the Working Hours Act may be relevant. There are important exceptions when the rules of the Act have been replaced by collective agreements. Therefore, distinguish between workplace safety requirements, working time matters, and labor law disputes before using the document.
When can a safety representative stop work under Chapter 6, Section 7?
The general rule concerns certain work that involves immediate and serious danger to the life or health of workers and where remedy cannot be achieved immediately by the safety representative turning to the employer. The safety representative may then stop the work while awaiting the Swedish Work Environment Authority's position. The rules also contain special grounds, including those concerning solo work. Student safety representatives do not have a corresponding stop right.
The safety representative shall notify the employer of the stop and the basis for the assessment. The notification can be oral; written documentation afterwards is important. If the parties agree on how the danger is removed, the work can be resumed safely. If the employer opposes the stop, the employer contacts the Swedish Work Environment Authority, which can decide whether the work should continue to be stopped. Do not use an ordinary 6:6a form as if it automatically implies a stop.
Example: recurring risk at a machine
Illustrative example. A safety representative sees that the safety devices at a machine repeatedly do not work and that previous error reports have not been followed up. In case of risks that need to be investigated and remedied, the safety representative can submit a clear 6:6a request and request a risk assessment, protective measures, and time for feedback. If, on the other hand, the conditions involve immediate and serious danger, and the employer does not remedy it immediately after contact, a safety representative stop under Chapter 6, Section 7 may become relevant. Which authority can be used is determined by the circumstances, not by which form is at hand.
Checklist before the matter is closed
- Are the risk and affected work steps described concretely?
- Are the correct safety representative and area of responsibility identified?
- Is each requested measure clear and possible to follow up?
- Has the employer confirmed receipt when this was requested?
- Has a response been provided without delay and has a reasonable response time been stated?
- Are the responsible person and schedule documented?
- Has the safety representative been given the opportunity to participate in the follow-up?
- Is there documentation showing what has been remedied and what risks remain?
A 6:6a process is part of a larger whole. Also read Mallbutikens guide to systematic work environment management (SAM) to understand how investigation, risk assessment, measures, and follow-up are connected.
Common questions
Can anyone submit a 6:6a request?
The special authority under the provision belongs to safety representatives, including student safety representatives according to the rules of the Act. Employees can, of course, identify risks and turn to the employer or their safety representative.
Is the employer obliged to accept exactly all proposed measures?
The employer shall handle the workplace safety risks and respond to the request without delay. If the parties disagree, the Swedish Work Environment Authority can review whether an order or prohibition should be issued. The request is not in itself an authority decision.
How long is the response time under 6:6a?
There is no general fixed day limit in the paragraph. The employer shall respond without delay and the safety representative's specified response time should be reasonable with regard to the matter.
Can the safety representative stop work just because a 6:6a request has not been answered?
No, not solely for that reason. The stop right has its own statutory conditions under Chapter 6, Section 7.
Does the question always go directly to the Swedish Work Environment Authority?
No. A 6:6a request is first directed to the employer. If a response is missing or the request is not considered within a reasonable time, the safety representative can request an authority review.
Related document templates
Request for workplace measures (6:6a)
Documentation for requirements, the employer's response, and measure follow-up.
See the 6:6a template packageSafety committee and workplace safety cooperation
Protocols and measure registers for organized workplace safety cooperation.
See templates for safety committeeLegal sources and official guidance
- Work Environment Act (1977:1160), especially Chapter 3, Sections 2 and 2a, and Chapter 6, Sections 6a and 7 – Swedish Parliament.
- Swedish Work Environment Authority: Request for measures (6:6 a).
- Swedish Work Environment Authority: Employer's handling of a 6:6a request.
- Swedish Work Environment Authority: Safety representative stop (Chapter 6, Section 7).
Source check 1 November 2026: the Work Environment Act (1977:1160), especially Chapter 6, Sections 6a and 7, and the Swedish Work Environment Authority's guidance have been checked. Swedish law. No special legal review has been performed. The text provides general guidance and does not replace individual legal advice or authority review. The assessment is affected by the concrete workplace safety risk, the safety representative's powers, and other applicable provisions.
Templates in this article
Explore the topic
Business guides – contracts, HR, AI & complianceSystematic work environment management 2026 – SAM according to AFS 2023:1 step by step
Guide to systematic work environment management according to AFS 2023:1: policy, risk assessment, action plan, division of tasks, incidents, and an...


